Material difference:

　　In terms of materials, the material thickness of this in**x class of taobao is generally about 0.4 mm for boat pvc or plastic materials. The thickness of the material is relatively thin, and it is a single air chamber design, that is, only one Air chamber or 2 air chambers, professional rubber boats are the material of professional inflatable boats: imported PVC material, thickness 0.9 mm, 1100D strength fiber mesh in the material, equivalent to a layer of strength fiber web sandwiched between 2 layers of pvc material. It can increase tensile force and impact resistance, and this PVC material is added with anti-ultraviolet materials, which can be exposed to long-term sun exposure without deformation or cracking, and this PVC material has replaced the traditional pure rubber material. Become the mainstream material for today's inflatable boats.

　　Professional PVC dinghies all use multi-chamber design, which means that there are 3-6 inflatable holes in a boat. In the case of one of the air chambers, the corresponding buoyancy can still be maintained, so the design of the multi-chamber will make The crew is safer.

　　The difference between components:

　　Compared with the in**x rubber boat, the professional pvc rubber boat has a stronger paddle. The thickness of the aluminum alloy is thicker and can be used for a long time without breaking or cracking. Commonly used parts such as paddle locks are in the form of plastic and metal buckles. This process ensures that it will not be damaged by excessive force during frequent sliding.

　　Weight difference:

　　In fact, judging the quality of a boat, as long as the weight of the seller's boat is known, the weight of a professional rubber boat of about 2.5 meters must exceed 30 kilograms. If the weight of the in**x inflatable boat should be more than 10 kilograms. Or lower, there are prices above, professional PVC dinghy generally 2.5 meters of the price should be more than 2000, if the price is too low, you should pay attention to whether there is a problem.

　　Suspension power difference:

　　Most in**x class inflatable boats do not have a suspension tail plate. If you need to add electric or fuel outboard engines, you need to purchase a stainless steel pipe hanging tail plate with a price of around 140-170. Note that the weight of your machine should not be too heavy, which means that you can only choose a small machine with 2-3 HP horsepower. For a 3-4 person in**x inflatable boat with a length of about 3 meters, this power is obviously Not enough, but if you need to hang a larger power outboard, such as an outboard engine of around 6HP, the weight of this powered machine is generally around 20KG, and the stainless steel brackets on the IN**x inflatable boat are unbearable. With such a large weight, the performance is that the stern is bent and the engine sinks into the water.

　　The professional pvc dinghy has a professional hanging tail plate. The thickness of the tail plate is generally 30-45 mm. This thickness is enough to withstand the weight of the outboard machine of 23-50Kg, which means that you will not be restricted by the ship. The power of the outboard engine.

　　Price difference:

　　Generally, the price of the series of inflatable boats in inxx is about several hundred yuan. The price of professional PVC nets and motorboats is generally between 2000-5000 yuan. There is still a big difference, but if the average is to every The cost of use will be different, because the latter can be used for a long time without damage, and the former is mostly 3-5 times of life.

　　Use route:

　　Most of the hundreds of dollars of inflatable boats are toys used in swimming pools. This kind of boat can never enter natural waters, because the hull and joints cannot withstand the excessive splash or wave impact from external forces due to the drawbacks of the hot melt process. It is easy to cause pressure loss and material tearing, which is very dangerous in rivers and lakes.